How to hang prints without making holes

 

A practical innovation in a small format that makes the hanging of paintings smoother - without leaving any marks or holes in the wall.
 

This self-adhesive and adjustable hook does not require a drill or hammer and therefore will not make holes in the wall. Make sure to follow the instructions both for attaching and removing the hook as an incorrect removal can result in marks.


Follow the 5 steps below and enjoy your framed lifeprints on the wall within minutes:

1. CLEAN THE WALL

First, make sure the wall is clean by cleaning the surface, preferably with a dust-free cloth, to ensure optimal holding power.

2. ATTACH THE TAPE

Attach the tape and make sure not to rush through this step. Follow the instructions and press your thumb firmly against the strip for at least 5 seconds as recommended on the package.

3. ATTACH THE HOOK

Attach the hook and make sure to press your thumb against it for a few seconds.

4. ADJUST THE HOOK

If necessary, adjust the hook to ensure that your print is hanging at the preferable height.

5. HANG YOUR FRAMED LIFEPRINT

Hang the framed print on the hook and enjoy it on the wall.

6. IF YOU WANT TO REMOVE IT

When you want to remove the hook, simply pull down the part of the strip protruding under the hook. By slowly stretching the strip parallel (do not pull it out, but straight down) alongside the wall, the hook will come loose. Remember that the strip cannot be reused once removed.

 

Any questions?

 

We're here to help. Simply email us at hello@pinxprints.com and one of our experts will guide you through the process.